Lab electrospinning unit

Nadetech ND-ES Lab Electrospinning Unit is a completely automatized equipment for fiber fabrication via electrospinning technique.
Its design and programmable software allows to control and automatize every electrospinning parameter with high accuracy and reproducibility.
NDES Lab Electrospinning Unit is used to obtain nanometric fibers for multiple applications such as biomedical coatings and all kind of smart coatings.
  • Maximum sample size: 100 x 100 mm
  • Nozzle distance: 5 – 70 mm
  • Minimum speed: 10 mm/min
  • Maximum speed: 500 mm/min
  • Flow rate: Depends on application
  • Dimensions (L·W·H): 454x600x650
  • ND-ES Lab Electrospinning Unit has been designed for the production and deposition of nanofibers on different substrates.
    ND-ES Lab Electrospinning Unit consists on an emitter connected to a controllable high voltage source.
    The system allows an accurate control of the flow rate, voltage and distance between the emitter and the collector. The equipment is manufactured for both vertical and horizontal depositions, allowing simple layout changes. Rotatory and planar disc collectors are available to obtain specific electrospinning fiber patterns.
    Operative system
    Windows XP; Windows Vista; Windows 7; Windows 8; Windows 10
    Pentium 400 MHz or equivalent (Minimum) | Pentium 1 GHz or equivalent
    96 MB (Minimum) | 256 MB (Recommended)
    Hard Disk
    The Installation requires 500 MB of free disk space
    800x600, 256 colors (Minimum) | 1024x768 high color, 32-bit (Recommended)
    Si desea información sobre cualquier producto, solicitar una oferta o realizar un pedido puede hacerlo a través del siguiente formulario. También llamando al 910 097 846. Estaremos encantados de atenderle.