All systems consist of a cold finger, radiation shield, sample holder, lightweight aluminum vacuum shroud, electrical feedthrough ports and a high efficiency flexible six foot cryogen transfer line.

SuperTrans can be operated in any orientation with only minor variations in efficiencies. Temperatures of the sample is varied by means of a heater attached to the cold finger.

The sample mount and all standard Janis sample holders have provisions for thermometry which, in conjunction with an optional temperature controller, allow precise control over sample temperature.

Standard systems produce sample temperatures of 77-325 K (LN2) and 4.2-325 K (LHe).
  • No vacuum pump required for temperatures over 4.2 K
  • No heating of exhaust gas required
  • Monitoring of flow rate not required
  • Easily adaptable to a He recovery system
  • Highly flexible transfer line with a minimum 12" bend radius
  • Si desea información sobre cualquier producto o realizar un pedido puede hacerlo a través del siguiente formulario. También llamando al 910 097 846. Estaremos encantados de atenderle.