VPF Series cryostats — sample in vacuum
- Cooling type LN2
- Minimum temperature: 65 K to 77 K (temperatures below 77 K with optional pumping manifold)
- Maximum temperature: 800 K
- Sample environment: Vacuum
- Sample environment: Vacuum
- Cooldown: 15 min (to 77 K)
- Typical stability: ±50 mK (measured with temperature controller)
- LN2 hold time (77 K): VPF-100: 8 h; VPF-100H: 5 h
- LN2 hold time (100 K): 4.5 h
- LN2 hold time (200 K): 2.5 h
- Vacuum level required: 10-4 Torr (vacuum pressure measured at room temperature prior to adding cryogens)
- Approximate weight: 7 lb (3.3 kg)
The VPF cryostat is an inexpensive liquid nitrogen cryostat offering operating temperatures from 65 K to 800 K. Simple to use and refill, the VPF system uses a refill-style displacer assembly and built-in heater to provide variable temperature capability. Temperatures below 77 K are achieved using an optional pumping manifold. High-temperature capability is provided using special sensors and heaters.
Optional window materials can be installed to span the far/mid- IR, VUV, and x-ray regions for a variety of spectroscopic measurements. The refill assembly permits the refilling of the LN2 reservoir without affecting the controlled temperature.
Si desea información sobre cualquier producto o realizar un pedido puede hacerlo a través del siguiente formulario. También llamando al 910 097 846. Estaremos encantados de atenderle.